Preparing for audio input
Prepare the camera for connecting audio input devices.
Using front microphone
Attach microphones such as the microphone kit AJ-MC700P (optional), AG-MC200G (optional), etc.
Viewfinder
Microphone holder
Fig. 1
AUD02:INPUT
CH1
CH2
FRONT
FRONT
W.L.
AUTO
REAR
MANU
[ IN ] [ LVL ] [ IN ] [ LVL ]
Fig. 4
1
Open the microphone holder. (Fig. 1)
2
Mount the microphone and tighten the viewfinder clamping screw. (Fig. 2)
3
Connect the microphone connecting cable to the <MIC IN> terminal on the camera. (Fig. 3)
4
According to the audio channel to be recorded, switch the input signal to [FRONT] on the [AUD02:INPUT] screen of SmartUI. (Fig.
4)
When using a wireless microphone receiver
1
Remove the cover to insert the wireless microphone receiver and secure it with the screws. (Fig. 1)
2
According to the audio channel to be recorded, switch the input signal to [W.L.] on the [AUD02:INPUT] screen of SmartUI. (Fig. 2)
3
When using a two-channel wireless microphone receiver, set to [DUAL] using main menu → [AUDIO SETUP] → [INPUT SETTING]
→ [WIRELESS TYPE].
Chapter 3 Preparation — Preparing for audio input
[ CH3 / 4 ]
W.L.
AUTO
REAR
MANU
Fig. 1
Viewfinder clamping screw
Fig. 2
AUD02:INPUT
CH1
FRONT
W.L.
REAR
[ IN ] [ LVL ] [ IN ] [ LVL ]
– 37 –
<MIC IN> terminal
Fig. 3
[ CH3 / 4 ]
CH2
FRONT
AUTO
W.L.
AUTO
MANU
REAR
MANU
Fig. 2