Preparing For Audio Input; Using Front Microphone; When Using A Wireless Microphone Receiver - Panasonic AJ-PX800G Operating Instructions Manual

Preparing for audio input

Prepare the camera for connecting audio input devices.

Using front microphone

Attach microphones such as the microphone kit AJ-MC700P (optional), AG-MC200G (optional), etc.
Viewfinder
Microphone holder
Fig. 1
AUD02:INPUT
CH1 CH2
FRONT FRONT
W.L. AUTO
REAR MANU
[ IN ] [ LVL ] [ IN ] [ LVL ]
Fig. 4
1
Open the microphone holder. (Fig. 1)
2
Mount the microphone and tighten the viewfinder clamping screw. (Fig. 2)
3
Connect the microphone connecting cable to the <MIC IN> terminal on the camera. (Fig. 3)
4
According to the audio channel to be recorded, switch the input signal to [FRONT] on the [AUD02:INPUT] screen of SmartUI. (Fig.
4)

When using a wireless microphone receiver

1
Remove the cover to insert the wireless microphone receiver and secure it with the screws. (Fig. 1)
2
According to the audio channel to be recorded, switch the input signal to [W.L.] on the [AUD02:INPUT] screen of SmartUI. (Fig. 2)
3
When using a two-channel wireless microphone receiver, set to [DUAL] using main menu → [AUDIO SETUP] → [INPUT SETTING]
→ [WIRELESS TYPE].
Chapter 3 Preparation — Preparing for audio input
[ CH3 / 4 ]
W.L. AUTO
REAR MANU
Fig. 1
Viewfinder clamping screw
Fig. 2
AUD02:INPUT
CH1
FRONT
W.L.
REAR
[ IN ] [ LVL ] [ IN ] [ LVL ]
– 36 –
<MIC IN> terminal
Fig. 3
[ CH3 / 4 ]
CH2
FRONT
AUTO W.L. AUTO
MANU REAR MANU
Fig. 2