Symbol Definitions - Extron electronics DXP HD 4K Series Setup Manual

Symbol Definitions

NOTE:
entered as either one-digit, two-digit, or three-digit numbers.
All input and output numbers are reported as two-digit
numbers in the response.
]
= Carriage return and line feed
}
or
• = Space
E
or W = <Escape> key
X@
= Input number (for ties)
X#
= Output number
X$
= De-embedded audio output
number
X^
= Room number (for room
presets)
NOTE: A room is a subset of operator-selected outputs that relate to each
other. The DXP switchers support up to 10 rooms, each of which can
consist of from 1 to 16 outputs.
X&
= Global preset number
X*
= Room preset number
NOTE: A room preset is a stored configuration with all of the outputs
assigned to a single room. When a room preset is retrieved from memory,
it becomes the current configuration.
X(
= Video and sync mute status
X1)
= Audio mute status
Input and output numbers in commands may be
¦
= Carriage return (no line feed)
0 through maximum number of inputs
for your model (0 = untied)
0 through maximum number of outputs
for your model
00 – maximum number of outputs
(analog and S/PDIF)
10 maximum. Each room can have up
to 10 room presets (
00 – 32 (00 = current configuration)
00 – current ties for the room in view
mode, 10 maximum
0 = Video and sync unmuted
1 = Video muted
2 = Video and sync muted
0 = Audio unmuted
1 = HDMI audio muted
2 = Analog audio muted
3 = HDMI and analog audio muted
4 = S/PDIF audio muted
5 = HDMI and S/PDIF audio muted
6 = Analog and S/PDIF muted
7 = HDMI, analog, and S/PDIF audio
muted
DXP HD 4K Series • Remote Control
X*
) assigned.
35