Command And Response Table For Sis Commands - Extron electronics DXP HD 4K Series Setup Manual

Command and Response Table for SIS Commands

NOTE: The following table is a partial list of SIS commands. For a complete listing, see the DXP HD 4K Series User Guide, "SIS
Configuration and Control."
Command Function
Output Switching
NOTES:
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*8$.
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!,02*02&, or 003*003%).
Tie HDMI input to HDMI video and
audio outputs.
Example
Tie input to output, HDMI video only
Example
X$
Tie input to output de-embedded
audio
Example
Quick Multiple Tie
Tie multiple inputs to multiple outputs,
audio and video
X@
NOTE: = Input number
X#
= Output number
X$
= De-embedded audio output number
ASCII Command Response
(Host to Switcher) (Switcher to Host)
X@ X#
* ! Out
1*2!
Out2•In1•All
X@ X#
* % Out
7*5%
Out5•In7•Vid
X@ X$
* $ Out
6*4$
Out4•In6•Aud
E X@ X# X@ X# }
+Q * % ... * !
Qik
0 – maximum number of inputs for your model (0 = untied)
0 – maximum number of outputs for your model (0 = untied)
1 – maximum number of outputs for your model
Additional Description
X# X@ ]
•In •All Tie HDMI input
X#
output
]
Tie input 1 output 2, video and audio.
X# X@ ]
•In •Vid Tie HDMI video
] Tie input 7 video to output 5.
X$ X@ ]
•In •Aud Tie HDMI audio input
X$
.
] Tie input 6 audio to output 4.
Tie multiple inputs
outputs
]
X@
to video and audio of
.
X@ X#
to HDMI output
X@
to audio output
X@
to multiple
X#
with one command.
.