Extron electronics DXP HD 4K Series Setup Manual page 42

X1@
= Audio and video mute status
X1$
= Total inputs
X1%
= Total outputs
X1^
= Voltage
X1&
= Temperature
X1*
= Fan speed
X1(
= EDID reference file for DDC
data
DXP 44 and 84:
DXP 88:
DXP 168:
DXP 1616:
X2!
= Firmware version (n.nn)
X2%
= Front panel lock mode status
(executive mode)
X3^
= IP address or gateway address
X3&
= Subnet mask
X4^
= DHCP
X5#
= Verbose mode
NOTE: If tagged responses is enabled (modes 2 and 3), all read commands
return the constant string and the value as the set command does (for
example, the read matrix name command
36 DXP HD 4K Series • Remote Control
0 = All audio and video unmuted
1 = Video muted (one or more outputs)
2 = Audio muted (one or more outputs)
3 = Video and audio muted (one or
more outputs)
Total number of inputs for this switcher
Total number of outputs for this
switcher
Positive or negative voltage and
magnitude
Degrees Centigrade
In RPM
9 = 720p @ 60 Hz (default)
EDID tables
See the
page 32.
1–17 = fixed factory rates
18–21 = not selectable (outputs)
26–33 = user assignable
1–17 = fixed factory rates
18–25 = not selectable (outputs)
26–33 = user assignable
01 – 17 = fixed factory rates
18 – 25 = not selectable (outputs)
34 – 49 = user assignable
1–17 = fixed factory rates
18–33 = not selectable (outputs)
34– 49 = user assignable
Shown to second decimal place
0 = lock mode 0
1 = lock mode 1
2 = lock mode 2
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
0 1
= off, = on
0 = clear/none (default for Telnet
connection)
1 = verbose mode (default for RS-232
and USB connections)
2 = tagged responses for queries
3 = verbose mode and tagged
E }
CN , returns Ipn •
beginning on
X3) ]
).