Douwe Egberts Cafitesse 60 Operator's Manual page 38

Fig. 82 Place a pot under the outlet
Caution!
- Press the stop button (fig. 76 d) if the
bucket is in danger of overflowing!
- Empty the bucket.
- Press the stop button again to
continue the descaling program.
With the model with a removable water
l
tank:
- When the "FILL TANK" symbol (fig. 84)
shows in the display for the first time,
flush the water tank thoroughly with warm
water to remove all the descaling residue.
- Fill the tank with clean water.
SELECT DRINK
STOP
Fig. 83 Check the operation
- Thereafter, fill the tank whenever the
"FILL TANK" symbol shows in the display.
26. When the descaling program has
completed, the display shows: "DRAIN".
27. Empty the bucket.
28. Remove the cap from the drain hose and
allow the water to flow into the bucket
(fig. 79).
29. Refit the cap on the drain hose when no
more water comes out of the hose (approx.
2.5 l).
30. Push the drain hose back into the rear wall.
31. Press the enter button (fig. 78 d).
The display shows:
.
"REPLACE PACK" +
34 34
FILL TANK
Fig. 84 Water tank empty, fill the tank
32. Place the ingredient packs back in the
cooling compartment, the display shows a
cup.
33. Press the enter button again (fig. 78 d).
The display first shows:
"PLEASE WAIT" and after that
34. The boiler will be filled with water. If the
water reaches the right temperature the
thermometer will disappear from the display
and will show "SELECT DRINK".
35. Place a pot under the outlet (fig. 82).
36. Check the operation of the dispenser by
pressing a selection button once and the
hot water button once (fig. 83).
The dispenser is now ready for use again.
.