Almost Empty" Warning - Douwe Egberts Cafitesse 60 Operator's Manual

SELECT DRINk
39 0 F
STOP
Fig. 65 Access to the operator menu
"Almost empty" Detection
In the operator menu, from the "ALMOST
EMPTY" selection menu (fig. 66), you can set
the "ALMOST EMPTY" detection.
This signal indicates that an ingredient pack
is almost empty, so you can thaw out in time a
new pack.
The dispenser then shows a symbol in the
display when an ingredient pack is "almost
empty." Place a new pack in the refrigerator
to defrost, when this symbol is shown. So the
pack will be ready for exchange, when it is
completely empty.
ALMOST EMPTy
STOP
Fig. 66 "ALMOST EMPTY" selection menu
1. Activate the operator menu.
2. Use the scroll buttons until the option
"ALMOST EMPTY" appears in the display
(fig. 66 a or b).
3. Press the enter button (fig. 67 d). The
display shows the option selected (fig. 67).
4. With the scroll buttons , choose "AED ON"
or "AED OFF" (fig. 67 a or b)
[AED = Almost Empty Detection].
5. Press the enter button (fig. 67 d) to confirm
the setting.
6. Then press the stop button (fig. 67 c) to end
the programming.
28
a
aed on
d
b
Fig. 67 Selecting "AED ON" or "AED OFF"
ATTENTION!
Only when the "ALMOST EMPTY" detection is
set the question if it is a new pack appears in
the display, while placing an ingredient pack.
1. Press the enter button to confirm if a new
pack is placed.
2. Do nothing if the former pack is replaced.
The question disappears automatically from
the display.
If also the option "SMALL PACK" is set, the
question if it is a small pack appears in the
display too, after the confirmation of a new
pack.
3. Press the enter button if a small pack is
placed.
4. Do nothing if a large pack is placed.
The question automatically disappears from
the display.
a
b
STOP
c