Douwe Egberts Cafitesse 60 Operator's Manual page 26

b
Fig. 47 Clean the round openings
9. Clean the interior of the cooling
compartment with a clean damp cloth
(fig. 47).
10. Clean the openings in the floor of the
cooling compartment with clean warm water
using the special brush supplied (fig. 47 b).
REPLACE PACK
d
STOP
Fig. 48 Replace pack
11. Press the enter button (fig. 48 d). The
display shows:
"REPLACE PACK" + .
12. Replace both ingredient packs in the correct
position. The flashing stops. (When using
just one ingredient pack, the flashing stops
approx. 5 seconds after replacement. Then
the program continues.)
22
REMOVE-CLEAN
d
STOP
Fig. 49 Remove trough
13. The display now shows:
"REMOVE-CLEAN" + (fig. 49)