Placing/Replace Ingredient Pack - Douwe Egberts Cafitesse 60 Operator's Manual

a b
SELECT DRINK SELECT DRINK
39 0 F 39 0 F
d e
(= optional)
SELECT DRINK
SELECT DRINK
39 0 F 39 0 F
Fig. 9 Indication in the display

Placing/replace ingredient pack

The dispenser shows a symbol in the display
when an ingredient pack is empty. Place/
replace the pack when the "pack empty" symbol
(fig. 9 b, c or d) shows in the display. (See also
§ "Display messages and troubleshooting" for
more information).
Optional:
The dispenser shows a symbol (fig. 9 e or f) in
the display when an ingredient pack is almost
empty and the "ALMOST EMPTY" warning
is set, see fig. 66. Place a new pack in the
refrigerator to defrost, when the "ALMOST
EMPTY" symbol shows. So the pack will be
ready for exchange, when it is completely
empty.
If the AED is active the dispenser askes, during
placing the ingredient packs, if it is a new pack,
and (optional) if it is a small one.
c
SELECT DRINK
39 0 F
f
(= optional)
SELECT DRINK
39 0 F
Fig. 10 Replace ingredient packs
1. Open the cooling compartment door.
2. Lift the empty pack out of the dispenser
(fig. 10)
Be careful of splashes, drops can come
l
out of the dispensing spout.
3. Throw away the empty pack.
4. Clean the interior of the cooling
compartment with a clean, damp cloth.
5. Always check the use-by date on the new
pack.
Never use a pack whose use-by date
l
has expired.
Always use the pack that has been in
l
storage the longest .
6. Follow the instructions on the pack.
a. Shake the pack at least 10 times.
b. Check whether the pack is fully
defrosted.
c. Fold open the dispensing spout.
Fig. 11 Pay attention to the use-by date!
7. Place the new ingredient pack in the cooling
8. Do nothing if the former pack is replaced,
9. Press the enter button to confirm if a new
10. Do nothing if a large pack is placed.
11. Press the enter button to confirm if a small
12. Close the cooling compartment door.
9
Caution!
Check the use-by date.
Check the pack is fully
defrosted.
compartment. Ensure that the dispensing
spout is properly positioned through the
hole in the cooling compartment!
When the "ALMOST EMPTY" warning is
l
set the display shows: "NEW PACK"?
e.g. during cleaning.
pack is placed.
When also the option "small pack" is set,
l
the display shows: "SMALL PACK"?
pack is placed.