Moving The Dispenser - Douwe Egberts Cafitesse 60 Operator's Manual

Fig. 24 Moving on a serving trolley
Caution!
- You may only move the dispenser
when you have disconnected the
power cord from the power supply.
- Always use a serving trolley or
something similar to move the
dispenser (26.5 kg).
- Move the trolley carefully to avoid
sudden movements, bumps or
shocks that might risk the dispenser
to tilt or fall from the trolley.
- Never use the dispenser on a server
trolley as a mobile station to dispense
hot drinks.
Fig. 25 Plug + switch
- When installing the dispenser on the
new location, ensure the placement
complies with the safety instructions
on page 2.
Make sure that there is sufficient
space around the dispenser for
ventilation.
- Ensure that the dispenser does
not overload the local electrical
installation.

Moving the dispenser

1. Lift the dispenser carefully onto a serving
trolley or something similar to move the
dispenser.
2. Keep the dispenser upright and do not
shake it while moving it.
14
Fig. 26 Place ingredient packs
3. Position the dispenser on a smooth,
horizontal and stable surface that can
support the weight of the dispenser
(26.5 kg).
4. Position the drip tray and grid in front of the
unit.
5. Insert the plug into the power outlet
(fig. 25).
6. Switch the dispenser on at the power switch
(fig. 25).
7. Place the ingredient packs (fig. 26).
8. Fill the water tank with clean, fresh drinking
water.
The dispenser is now ready for use.