Douwe Egberts Cafitesse 60 Operator's Manual page 21

total CON L
d
39 0 F
STOP
Fig. 32 Selection/reading out counter
3. Press the scroll button (fig. 32 b). The
display shows the total counter for the left
ingredient: "TOTAL CON L".
4. Press the scroll button (fig. 32 b) again.
The display shows the total counter for the
right ingredient: "TOTAL CON R".
5. Press the scroll button (fig. 32 b) again.
The display shows the total counter for the
water filter (optional!) "TOTAL FILTER".
Reset the counter, for instance when a
l
new water filter is installed.
6. Press the enter button (fig. 32 d) to reset
the counter. The display shows: "RESET ?"
(fig. 33).
7. Press the stop button (fig. 33 c) if the
counter must not be reset.
a
reset ?
b d
Fig. 33 Resetting counter
8. Press the enter button (fig. 33 d) if the
counter must be reset.
The display shows the selection menu
l
again, where you can select various
counters.
9. Use with the scroll buttons (fig. 34 a or b)
the counter of the desired selection button.
- "BUTTON 1 (2, 3 or 4) POR or RTD";
- "HOTWATER POR or RTD";
- "C.WATER POR or RTD".*
10. Press the enter button (fig. 33 d) to reset
the counter of the concerning selection
button.
The display shows: "RESET ?".
l
11. Press the stop button if the counter must
not be reset.
a
STOP
c
Fig. 34 Counter button 1 POR(tions)
12. Press the enter button if the counter must
13. Repeat the previous procedure for the
14. Press the stop button (fig. 31 c) twice to
17
button $ por
d
30
STOP
c
be reset.
The display shows the selection menu
l
again, where you can select various
counters.
remaining counters.
end the programming.
a
b