Start Descaling Program (Optional) - Douwe Egberts Cafitesse 60 Operator's Manual

select drink
39 0 F
c
STOP
Fig. 76 Access to the operator menu

Start descaling program (Optional)

For a explanation of the terms in the display
and the associated buttons, see also § "Access
to the operator menu" (fig. 27).
For the model without a fixed water
connection the removable water tank must be
filled a number of times during the descaling
process. Fill the tank when the "FILL TANK"
symbol (fig. 84) shows in the display.
a
descale
d
Fig. 77 Scrolling in the selection menu
During descaling, if the bucket is in danger of
overflowing, the program can be interrupted by
pressing the stop button (fig. 76 c). The bucket
can then be emptied. Press the stop button
again to continue.
The program can not be aborted while it is
running and must thus be run to completion.
1. Wear suitable face protection and protective
gloves.
2. Activate the operator menu (fig. 76), see
also § "Access the operator menu" (fig. 27).
3. The display shows: operator mode,
"COUNTER READ", scroll arrows , enter
and back.
a
b
STOP
Fig. 78 Starting the descaling program
4. Use the scroll buttons until the option
5. Press the enter button (fig. 78 d).
6. Press the enter button again (fig. 78 d).
7. Remove the drip tray.
8. Slide the dispenser forwards slightly and
32 32
drain
d
STOP
"DESCALE" appears in the display
(fig. 77 a or b).
The display shows:
"ARE YOU SURE?".
The display shows:
(fig. 78).
"DRAIN" +
place a bucket with a capacity of at least
12 liters/3.17 gallons underneath.