Cleaning And Maintenance - Peg-Perego pilko switch Instruction Manual

(fig_b) and tighten it with the two-way slider (fig_c).
31 HANDLE: Rotate the handle upwards until it clicks
into place (arrow_a). The handle is only locked in
place when it is in the vertical position. To lower the
handle, press the two round buttons at the same time
(arrow_b) and rotate it downwards (arrow_c). The
handle is useful for carrying the Navetta XL (fig_d)
and for fitting it to stroller.
32 ROCKING CRADLE POSITION: The Navetta XL base has
a special shape which, when laid on a flat surface,
enables to rock the baby (fig_a). BED POSITION: The
Navetta XL turns into a non-rocking cradle by pulling
out the two stands placed under the base (fig_b).
33 ADJUSTING THE BACKREST and THE FOOTREST: with
the COMFORT SYSTEM, backrest and footrest can
be adjusted simultaneously. Pull the knob outwards
(fig_a) while turning it (fig_b) to raise or lower the
backrest and the footrest.
34 FOUR SEASONS SYSTEM: There are holes under the
base of the Navetta XL which can be opened or
closed to adjust the air circulation inside it.
To open the holes, move the 4 levers outwards.
35 REMOVING THE LINING OF THE NAVETTA XL:
Unbutton the hood on the sides and the back (fig_a),
press down on the clips to release them (fig_b) and
pull the hood upwards to remove it.
36 Unbutton the cover and remove it (fig_a), raise the
backrest, detach the inner lining (fig_b) and pull it
upwards to remove it (fig_c).
GANCIOMATIC SYSTEM
37 Ganciomatic System is a quick and practical way to
attach the Navetta bassinet, the PrimoViaggio car seat
and the Pliko Switch seat to the Ganciomatic Base of
the chassis in a single movement.
Place the item on the Ganciomatic Base and press
down with both hands until it clicks into place.
Always apply the chassis or stroller brake before
attaching and removing products (refer to the
respective instruction manuals).
Check that the child transport unit is properly
attached.
38 FASTENING NAVETTA XL: To fasten the Navetta XL,
rest it on the stroller and press with both hands until
it clicks into place.
Always apply the brakes on the stroller or chassis
before attaching and removing the Navetta XL.
Check that the bassinet unit is properly attached.
_ To release it, raise the lever of the Ganciomatic clip
(arrow_a) and lift up the Navetta XL (arrow_b).
ACCESSORIES
39 CAR KIT: The ECE R44/04-approved car kit is available
on request. It contains all the necessary items to fit
the bassinet in the car (fig_a).
COVER ALL RAIN CANOPY: Transparent cover-all rain
canopy for Navetta XL (fig_b).
40 BASSINET STAND: Practical and compact support base
(fig_a).
DIAPER-CHANGING BAG: Diaper-changing bag with
pad for changing baby's diaper. It can be attached to
the stroller (fig_b).
SERIAL NUMBERS
41 Pliko Switch reports information as at the date of
manufacture of the product.
_ Product name, date of manufacture and serial
number of the seat (fig_a) and of the carriage (fig_b).
42 Information about the production date of Navetta XL
can be found under the base.
_ Product name, production date and serial number.
This information is required for any complaints.

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and
free of dust and sand and, if necessary, lubricate with
light machine oil.
CLEANING THE RAIN CANOPY: wash with a sponge
and soapy water; do not use detergents.
CLEANING FABRIC PARTS: brush fabric parts to
remove dust and wash by hand at a maximum
temperature of 30°C; do not wring; do not use
chlorine bleach, do not iron; do not dry clean; do not
apply solvent-based stain removers and do not dry in
a tumble dryer.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001
certified company. This certification is a
guarantee for customers and consumers
of the transparency and trustworthiness
of the company's procedures and
working methods.
Peg Pérego can make changes at any time to the
models described in this publication for technical or
commercial reasons.
Peg Pérego is at the disposal of its customers and
consumers to ensure that all their demands and
queries are fully satisfied. It is a key part of our policy
to ensure we are always aware of our customers'
views and requirements. We would therefore be very
grateful if, after using a Peg Pérego product, you
take the time to fill in our CUSTOMER SATISFACTION
QUESTIONNAIRE, making a note of any comments
or suggestions you might have. You can find the
questionnaire on the Peg Pérego website: www.
pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of your Peg Pérego product should be
accidentally mislaid or damaged, use exclusively
genuine original Peg Pérego replacements. For any
repairs, replacements, product information, and
orders for genuine original replacement parts and
accessories, please contact Peg Perego After Sales
Service indicating the product serial number, if any.
tel. 0039/039/60.88.213
e-mail assistenza@pegperego.it
website www.pegperego.com
- 24 -
fax 0039/039/33.09.992