Xerox WorkCentre 5945 User's Manual And Warranty page 119

Copy
19. Enter the number of prints required using the numeric keypad on the control panel.
20. Press the Start button on the control panel to scan the original.
21. Remove the original from the document feeder or document glass when scanning has
completed. The job enters the job list ready for processing.
22. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
23. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Using a User ID to Log In at the Device
Viewing the Progress and Details of a Job using the Job Status Menu
Adding Comments to Copies
When you press the Start button to make a copy, the device scans your originals and temporarily
stores the images. It then prints the images based on the selections made.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Copy features.
Use the Comment feature to add up to 50 alphanumeric characters in a specified position on the
page. An existing comment can be amended, or a new comment can be created.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All button on the control panel to cancel any previous programming selections.
3. Press the Services Home button.
4. Select the Copy button on the touch screen. The copy features are displayed.
5. Select the Output Format tab.
6. Select the Annotations button.
7. Select the Comment button.
8. Select the On button to apply a comment to your output.
• If required, select the Off button to produce output without a comment.
9. Select the comment you require from the Stored Comments list. To edit an existing comment,
highlight the comment in the list and select the Edit button. Use the keyboard to edit the entry,
then select OK to close the keyboard.
10. Select an arrow button to determine the position of the comment on the output sheets.
11. Select the required option from the Apply To dropdown menu.
• All Pages adds the annotation to all pages.
• All Pages Except First adds the annotation to all pages except the first page.
• First Page Only adds the annotation to the first page but not to any subsequent pages.
User Guide
®
WorkCentre 5945/5955
117