Rear Panel - Cary Audio Design SI-300.2d Owner's Manual

CONTROLS AND DISPLAYS

REAR PANEL

LINE 4 ANALOG INPUT JACK (XLR BALANCED) W/CINEMA BYPASS
1.
For connecting an XLR balanced source, or the front main Right & Left outputs of a surround
sound processor.
LINE 2 ANALOG INPUT JACK (XLR BALANCED)
2.
For connecting an XLR balanced source.
LINE 1 ANALOG INPUT JACK (RCA SINGLE-ENDED)
3.
For connecting an RCA source.
4. LINE 3 ANALOG INPUT JACK (RCA SINGLE-ENDED) W/CINEMA BYPASS
For connecting an RCA source, or the front main Right & Left outputs of a surround sound
processor.
DIGITAL OUTPUT JACK (TOSLINK)
5.
44.1 kHz – 192 kHz digital data output.
DIGITAL OUTPUT JACK (COAXIAL)
6.
44.1 kHz - 192 kHz digital data output.
DC TRIGGER INPUT TERMINALS
7.
Connection of devices that have DC + 12V output for remote turn-on/off of the SI-300.2d.
IR INPUT
8.
Connection of external IR sensors.
ETHERNET RJ45 JACK
9.
For network system control.
MINI USB FIRMWARE
10.
For internal service use only
POWER INPUT (AC IN)
11.
Connect to AC mains using the included power supply cord.
11