Table of Contents
Advertisement
CONTROLS AND DISPLAYS
REAR PANEL
1 & 2. UNBALANCED/BALANCED INPUT 1 TO 7 CONNECTORS
Provides audio input for the speakers connected through the unbalanced (RCA) inputs or
balanced (XLR) inputs.
The illustration below shows the appropriate cable pin-out of XLR connectors.
Never make or break connections to the Model 7.125 unless the Model 7.125 and all
associated components are powered off.
Do not connect the outputs of one channel to the outputs of the other channel or to
other amplifiers.
3. SPEAKER OUTPUT CONNECTORS
Provide audio output for the speakers. Output connectors can accept bare speaker wires or most
spade connectors. When using bare speaker wires, loosen the connector, insert the wire into the
top of the receptacle, and tighten the connector. The same procedure should be used for spade
connectors.
9
Advertisement
Table of Contents
