Menu Operation; Setup Menu Overview; Procedures For Navigating Ethernet And Wi-Fi Sub Menus - Cary Audio Design SI-300.2d Owner's Manual

MENU OPERATION

SETUP MENU OVERVIEW

1. Press "MENU" on the hand held remote.
2. The display screen will show the Menu Mode as follows:
SETUP MENU
Volume Setup
IR Controls
Ethernet
Wi-Fi
EXIT
3. Using the "UP" or "DOWN" arrow keys on the remote, highlight your selection and press
Enter.
4. Make your selections for each mode and press Enter to back out to the Setup Menu.
5. When finished, select EXIT and press Enter to leave the Setup Menu.

PROCEDURES FOR NAVIGATING ETHERNET AND WI-FI SUB MENUS

Select Ethernet or Wi-Fi and press enter.
A * will denote the active sub menu topic with a selection choice below it.
1.
Enable
No
2. To change the default selection of a sub menu topic, press enter. Notice the * will move
down to indicate the active selection which will blink.
STEP 1
Enable:
No
(blink)
3. As it blinks, use the up/down keys on the remote to change the available choices and press
enter to make your selection. Note that all selection choices are not visible and you must
use the up/down keys to scroll all available choices.
STEP 2
Enable:
Yes
(blink)
*
*
*
14