Network Wi-Fi Setup (From App) - Cary Audio Design SI-300.2d Owner's Manual

MENU OPERATION

NETWORK WI-FI SETUP (FROM APP)

Once you have downloaded the SI-300.2d control app for your iOS or Android device, please follow
the step below.
By default, Ethernet is enabled for the SI-300.2d. Simply plug an Ethernet cable into the Ethernet
port on the SI-300.2d. If you have trouble connecting the app, be sure to confirm the SI-300.2d's
Ethernet is connected using the previous instructions under "NETWORK ETHERNET AND WI-FI
SETUP". Make sure the Ethernet cable is firmly connected and the SI-300.2d shows "Connected"
under Ethernet settings. If not, try resetting the Ethernet and repeat steps.
Wi-Fi Setup
To Setup Wi-Fi from the app you MUST first connect the SI-300.2d to Ethernet and establish a
connection from the steps above.
(This step assumes you have NOT setup the Wi-Fi from the SI-300.2d itself).
1. Open the app and it will automatically search for Ethernet connected SI-300.2d's.
2. C lick on the Settings icon in the app then select Network.
3. Select Wi-Fi/Wireless.
4. From the Wi-Fi AP dropdown box, select your wireless network.
5. Enter your Security Key and select Save.
6. Next, click the red Reset Network button.
7. Confirm the Wi-Fi is connected in the SI-300.2d's Setup Menu.
1. You should now be able to unplug your Ethernet connection from the SI-300.2d with all
connectivity now being Wi-Fi.
20