Controls And Displays; Front Panel - Cary Audio Design SI-300.2d Owner's Manual

CONTROLS AND DISPLAYS

FRONT PANEL

1. POWER
Press once to turn the power ON. The blue indicator ring will blink until the unit is ready to
operate. Press again to turn the power off.
2. DISPLAY
Press to change the brightness level of the front panel display. Low-->Medium-->High--
>Off
3. MUTE
Press to mute the output volume. Press again to disengage mute. When disengaging, it
takes a few seconds for sound to resume.
4. SAMPLE RATE COVERTER BUTTON
Use this button to change the sample rate of the input signal via Cary Audio TruBit™
upsampling technology. Each time the button is pressed, the sample-rate will increase as
follows:
BYPASS (44.1) ---> 48 ---> 88.2 ---> 96 -à176.4 ---> 192 ---> 352.8 /384---> 705.6/768
kHz ---> DSD64 ---> DSD128 ---> DSD256
5. CINEMA BYPASS
Press to activate signal pass-thru (deactivating volume control) if connected to a surround
sound processor. For Line Inputs 3 & 4 only.
6. BLUETOOTH INPUT BUTTON
Press this button to select the program source of connected/paired BLUETOOTH source.
7. USB INPUT BUTTON
Press this button to select the PC or MAC computer connected to the digital input jack
labeled USB.
9