CONTROLS AND DISPLAYS
REAR PANEL
1. BALANCED INPUTS
• Accepts right-channel and left-channel balanced signals from source equipment with
balanced outputs.
• The pin assignments of these XLR-type female input are:
Refer to the operating manuals of your balanced-output line-level sources to verify that
the pin assignments of their output connectors correspond to the SL-100. If not, wire the
cable so that the appropriate output pin connects to the equivalent input pin.
2. SINGLE-ENDED INPUTS
• Accepts right-channel and left-channel (RCA) inputs from line-level source equipment
such as DACs, tuners, CD player or SACD player.
3. ANALOG RECORD OUTPUT JACK (RCA UNBALANCED)
• Use these jacks for connection to the right-channel and left-channel tape inputs of your
recorder.
4. SINGLE-ENDED MAIN OUTPUTS
• Use these jacks for connection to the power amplifiers.
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
9