Network Ethernet And Wi-Fi Setup (From Dac) - Cary Audio Design SI-300.2d Owner's Manual

MENU OPERATION

NETWORK ETHERNET AND WI-FI SETUP (FROM DAC)

The SI-300.2d comes with both an Ethernet Port and built-in Wi-Fi for connection to your network
for controlling the SI-300.2d via network control systems as well as iOS and Android Apps.
Ethernet
Enable;
1.
Yes No
or
Yes is the default setting.
IP Assign:
2.
DHCP
or
Select DHCP for an IP address to be assigned automatically to the SI-300.2d (most
common method).
(If Static is selected, follow steps a & b)
Assign IP:
a)
--- --- --- ---
Enter your desired IP address using the hand held remote control.
Connect:
b)
Yes
After entering your desired IP address, select YES.
Status:
3.
Connected
Connected will display once successfully connected to your network. If the connection
was unsuccessful No Connection will be displayed. If this happens, make sure your
Ethernet cable is plugged into the SI-300.2d and your router/network is setup for DHCP.
After confirming, make sure the above selections are correct and jump to Reset
Connection below.
Reset Connection:
4.
Yes No
or
If your connection was unsuccessful, or you just need to reset the network connection for
any reason, select YES.
Static
16