Table of Contents
Advertisement
9.6. Transmit Power Calibration
To begin calibration of the transmitter, select "Non signaling Test" from the "Modes" pull-down menu in PhoneTool and
complete the following steps.
1. Click the "Connection" button.
2. Click the "Non signaling mode" button.
3. Select "TSC=5" and check the "Random" of GMSK Mode.
4. Before starting Power Level Calibration, the Power Ramp Editor should be enabled.
The Power Ramp Editor popup window is displayed.
– 9-12 –
Advertisement
Table of Contents
