Panasonic EB-VS3 Service Manual page 33

Hide thumbs Also See for EB-VS3:

Table of Contents

Calibrated Torque Screwdriver

This screwdriver is required to secure the case screws on the phone. It must have settings for 1.3 kgf and 2.5 kgf.

Power Supply

Two power supplies is required to provide power to the PCB via the PCB Repair Jig while a second unit is required to

provide power baseband calibration and unit testing.

GSM Test Set

This unit acts as a base station providing all the necessary GSM signalling requirements and also provides GSM signal

measuring facilities.

– 7-5 –

Table of Contents