Table of Contents
Advertisement
6.3. Reassembly
IF ANY RF, BLUETOOTH OR BASEBAND SHIELDS ARE REMOVED FROM THE PCB AT ANY TIME, THEY
MUST BE REPLACED WITH NEW ITEMS. ONCE REMOVED, THE SHIELDS MUST NOT BE REUSED.
Notes: If the case assemblies have been disassembled and reassembled more than three times, they should
be replaced with new items.
Examine all case and cover parts before assembly. If any scratches or defects are found in their finish,
they should be replaced with new items.
Upper Case reassembly
1. Fit the LCD module onto the upper cover.
2. Fit the Upper PCB on the Upper cover.
3. Press and hold the adhesive tape with Upper PCB.
4. Reconnect the four flexi-strips to the PCB and lock in place, taking care not to damage the receiver connector flexi-strip.
LCD module
Upper PCB
Flex-strip
CAUTION
Upper Cover
Camera module
Adhesive tape
– 6-8 –
Advertisement
Table of Contents
