Table of Contents
Advertisement
7. Using tweezers, remove the hinge holder.
8. Carefully insert tweezers into the gap between FPC and Main PCB.
9. Gently lift up the tweezers direction of the arrow and then remove the FPC connector.
10.Remove Main PCB from the lower front cover.
Note: Take care not to damage the FPC connector when disconnecting the FPC from the Main PCB.
Upper Case Assembly and Display Modle removal
1. Set the phone into the "open" position.
2. Using tweezers or a pin gently lift up and remove the three panels.
Note: The three panels must be replaced with new parts for reassembly.
Hindge holder
Three panels
FPC connector
– 6-4 –
Advertisement
Table of Contents
