Table of Contents
Advertisement
1. Click the "V24 AT# On" , and check the log window. >>> "AT# OK"
2. Click the "Update Info" button, and check the log window. >>> "OK"
Note: If the massage "ERROR" is displayed, check the cable connections, the power supply and that the phone is
switched on. Repeat step1 and 2.
Battery Voltage AD Calibration
PCB Repair Jig
PC
With
Jig Data Cable
"Dongle"
T
PS-1 (DC Power supply)
4.2 V and 3.2 V
1. Set the LCD type to "Main".
2. Set Action to "Off" and then click to "Set".
3. Set Action and Fade to "Off" and then click "Set".
– 9-5 –
Advertisement
Table of Contents
