Panasonic EB-VS3 Service Manual page 26

5. Postion the camera macro switch and the case-mounted actuator so that they engage when the case halves are mated.
Upper Cover
6. Place the Upper Case Assembly on the upper cover. Assemble the Upper Cover with the Upper Case Assembly.
Close the four snaps making sure that both assemblies are connected.
7. Fit the four screws saved during disassembly, and tighten to 1.3 kgf.
8. Fit two new screw covers and Main LCD panel on the Upper Cover.
Macro Mode Switch
Four screws
Screw cover LCD panel
– 6-9 –
Upper Case Assembly