Rx Characteristics; Residual Peak Power - Panasonic EB-GD35 Service Manual

5.1.6. Output Level, Dynamic Operation
GSM 900
GSM 1800
5.1.7.

Residual Peak Power

Equal to or less than 70 dBc (BW = 300 kHz)

5.2. Rx Characteristics

5.2.1. Sensitivity
GSM 900 Full Rate Speech
The reference sensitivity performance in terms of frame erasure, bit error, or residual bit error rates (whichever is appropriate) is
specified in the following table, according to the propagation conditions.
Channels
TCH/FS FER
class Ib (RBER)
class II (RBER)
The reference sensitivity level is < -102 dBm.
NOTE: 1 < α < 1.6. The value of a can be different for each channel condition but must remain the same for FER and
class 1b RBER measurements for the same channel condition.
GSM 900 Half Rate Speech
The reference sensitivity performance in terms of frame erasure, bit error, or residual bit error rates (whichever is appropriate) is
specified in the following table, according to the propagation conditions.
TCH/HS (FER)
TCH/HS class Ib (BFI=0)
TCH/HS class II (BFI=0)
TCH/HS (UFR)
TCH/HSL class Ib ((BFI or UFI)=0)
http://cxema.ru
Power Control Transmitter Output Power
Level
TBA
Power Control Transmitter Output Power
Level
TBA
Propogation Conditions
TUhigh
Test Limit Minimum
error rate No. of
% samples
6.742*α 8900
0.42/α 1,000,000
8.33 120,000
Propogation Conditions
Channels
Test Limit
error rate
4.598
0.404
7.725
6.250
0.269
Tolerance for Conditions (dB)
(dBm)
Normal
Tolerance for Conditions (dB)
(dBm)
Normal
Propogation Conditions Propogation Conditions
RA
Test Limit Minimum Test Limit
error rate No. of
% samples
7.5 24000 9.333
Propogation Conditions
TUhigh
Minimum Test Limit
No. of error rate
% samples %
13050
148500
25500 8500
9600
227000
27
Extreme
Extreme
HT
Minimum Test Limit
error rate No. of error rate
% samples
0.122*α
0.41/α
60000 2.439
Propogation Conditions
RA
Minimum Test Limit
No. of error rate
samples %
20000 7600
EB-GD35 EB-GD35C
Static Conditions
Minimum
No. of
% samples
164000
20,000,000
8200
HT
Minimum
No. of
samples
20000