Hazard Warning Flashers; Emergency-Off Switch; Switch) - BMW HP4 Rider's Manual

Hazard warning
flashers
Switching on hazard
warning flashers
Switch on ignition.
The hazard warning flash-
ers place a strain on the
battery. Do not use the hazard
warning flashers for longer than
absolutely necessary.
If a turn indicator button
is pressed with the emer-
gency flashing function switched
on, the flashing function replaces
the emergency flashing function
as long as the button is pressed.
If the turn indicator button is re-
leased, the emergency flasher
function becomes active again.
Press button 1 to switch on

hazard warning flashers.

Ignition can be switched off.
Switch on ignition and press
button 1 again to switch off

hazard warning flashers.

Emergency-off switch

(kill switch)
1 Emergency-off switch (kill

switch)

Operating the emergency
ON/OFF switch when riding
can cause the rear wheel to lock
and thus cause a fall.
Do not operate the emergency
ON/OFF switch when riding.
The engine can be switched
off easily and quickly using the
emergency kill switch.
4
41
z