BMW HP4 Rider's Manual page 158

Diode tail light
9
If more LEDs have burned out in
the tail light than are indicated in
156
the Technical Data below, the tail
light bulb must be replaced. In
this case:
Contact an authorized service
facility, preferably an authorized
BMW Motorrad retailer.
Maximum number of de-
fective LEDS in the tail-
lamp
z
1
Replacing license plate
light
Pull license-plate light 1 out of
light housing.
Remove light source from
socket.
Replace defective license plate
light.
Bulb for license-plate
light
W5W / 12 V / 5 W
To prevent dirt from being de-
posited on the glass surface,
always use a clean, dry cloth to
hold the light source.
Press light source into socket.