BMW HP4 Rider's Manual page 153

Remove cover 2 to replace
light source for high-beam
headlight.
Disconnect plug 3.
Release wire spring 4 from
catch on left and right and fold
up.
Remove light source 5 from
socket.
Replace defective light source.
Light sources featuring
specification ratings for
higher levels of illumination are
commercially available as special
accessories. These light sources
have a shorter service life than
conventional light sources and
also generate more heat. Un-
der some circumstances the high
levels of heat radiation can dam-
age the headlight assembly.
Bulbs for low-beam
headlight
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
To protect glass against soiling,
only grasp light source by base.
9
151
z