BMW HP4 Rider's Manual page 127

Passenger footrest
holder on the rear frame
21 lb/ft (28 Nm)
Slightly pull retaining strap 1
apart and pull it from the back
over the muffler.
Align retaining strap and muf-
fler. Slide washer, retaining
strap and second washer onto
the footrest screw.
Install nut 2, however do not
tighten it yet.
Install screw 3.
Tighten nut 2 to the specified
torque.
Muffler clamp on holder
15 lb/ft (20 Nm)
Remove screw hole covers 1.
Attach the passenger footrest.
Install screws 1 with specified
torque.
Passenger footrest
holder on the rear frame
21 lb/ft (28 Nm)
BMW Motorrad ABS Pro
OA
with ABS Pro
Since the introduction of the
Race ABS, BMW Motorrad
has offered an ABS system
custom-tailored to meet the
special needs of super sports
motorcycles. With the ABS Pro
8
125
z