BMW HP4 Rider's Manual page 156

9
154
Remove light source 4 from
socket.
Replacing defective light
z source.
Bulb for parking light
W5W / 12 V / 5 W
To prevent dirt from being de-
posited on the glass surface,
always use a clean, dry cloth to
hold the light source.
Insert light source 4 in light
source socket.
Insert socket 3 in headlight
housing, continuing to apply
pressure until retainer 2 en-
gages.
Install cover.
Replacing front and
rear turn indicator light
sources
Park motorcycle, ensuring that
support surface is firm and
level.
Switch off ignition.
Remove screw 1.