BMW HP4 Rider's Manual page 147

it cannot fall down after the
quick-release axle is removed.
Remove axle nut 1 with
washer.
Loosen lock nuts 3 on left and
right.
Loosen adjusting screws 2 on
left and right.
Remove adjusting plate 4 and
slide axle as far as possible to-
ward inside.
Remove quick-release axle 5
and take out adjusting plate 6.
Roll rear wheel as far forward
as possible and remove
chain 7 from chain sprocket.
Remove brake and ABS line
from bracket 8.
Make sure that the wheel
speed sensor 9 is not
damaged when rolling out the
rear wheel.
9
145
z