BMW HP4 Rider's Manual page 149

Roll rear wheel further into
swing arm while simultaneously
pushing brake caliper carrier 10
toward front.
Roll rear wheel as far forward
as possible and lay chain 7 on
sprocket.
Insert right side shim 6 in
swing arm with travel stop 12
pointing toward front.
Raise rear wheel and install
quick-release axle 5 through
shim in brake-caliper support
and rear wheel.
Ensure that quick-release axle
seats securely against travel
stop on adjustment plate.
Mount adjusting plate on left 4.
Install axle nut 1 with washer,
however do not tighten yet.
9
147
z