Table of Contents
Advertisement
You can use the correction button to reset defined
Correction button 'C'
settings. The correction button can also be used to stop scanning a job. The
correction button actually affects the preparation phase of a job: choosing
settings and scanning originals.
Press the correction button once to reset the number of copies to '1'. When you
press the button a second time, all settings will be reset to their standard values.
If the copy counter has already been set to '1', pressing the correction button
will return all settings to their standard values. We recommend that you press
this button twice before copying in order to make sure that the standard values
are active.
When operating the Network Copier, the key operator can also define whether
the machine is mainly used for printing or for copying. If you press the
correction button a third time, the machine switches to its initial mode, which
can be 'Print' or 'Copy'.
The correction button can also be used to delay a print job if you want to copy
during a job (see 'Accessing the Océ 31x5E Network Copier' on page 29).
The red button above the correction button with the symbol
Stop button
'
' is used to stop a job that is being printed. You can indicate whether to stop
after the current set is finished (by pressing the stop button once) or to stop
immediately (by pressing the stop button twice). Before the job is canceled
definitively and the data is erased, the copier will ask for confirmation. The
stop button thus affects the execution phase of a copy job or print job.
When the printing of pages stops, the scanning of originals does not stop. If the
job being printed is a copy job, and the stopping of the job is confirmed by
pressing the start button, the scanning will also stop and all scanned pages will
be deleted.
The arrow buttons
,
,
and
, which are grouped in the
Arrow buttons
form of a star to the right of the display, are used to choose settings. The display
indicates whether these buttons can be used.
The two buttons to the left of the display are not used at this time. These
Note:
buttons will be used in a later release.
Introduction
19
Advertisement
Table of Contents
