Instructions for safe use
Attention:
conformance with the strictest international safety standards. However, to
help assure the safe operation of these products, it is important that:
you carry out maintenance only as far as prescribed in this manual.
I
you observe the following safety recommendations:
I
Maintenance
Do not remove any screws from fixed panels.
I
Do not place any liquids on the machine.
I
Use maintenance materials or other materials for their original purpose only.
I
Keep maintenance materials away from children.
Do not mix cleaning fluids or other substances.
I
To avoid damage and the risk of personal injury, all modifications to Océ
I
equipment are strictly reserved for properly qualified and trained service
technicians.
Power connection
Do not move the machine yourself: contact Service
I
If unforeseen circumstances force you to re-install the machine without the
I
assistance of Océ Service, make sure that the machine is connected to a
power outlet which is equipped with a fuse or circuit breaker with the
appropriate capacity.
Do not bridge any mechanical or electrical circuit breakers.
I
Do not use an extension cord to connect the machine.
I
We recommend that you connect only copy-control devices or other devices
I
which meet (inter)national product safety and radio-frequency interference
standards, and that you use connection cables recommended by Océ.
This equipment is not designed for connection to an IT power system. (An
I
IT power system is a voltage network in which the neutral wire is not
connected to earth.)
For equipment connected via a wall outlet: place the machine close to an
I
easily accessible wall outlet.
For equipment connected to the electrical system via a permanent
I
connection: make sure that the disconnect device in the permanent
connection is easily accessible.
Products designed by Océ are developed and tested in
101