Open the special feeder above the paper compartment door using the formed
6
grip (see figure 37).
[37] Opening the special feeder
Insert a sheet of copy material with the side to be copied face-down.
7
[38] Inserting special copy material in the special feeder
The orientation of the copy material must match the orientation of the
Note:
original to be copied. You can insert 8.5x11" material in both orientations
into the special feeder (see figure 36 on page 64).
Define other settings as desired.
8
Some settings will not be possible if you are copying from the glass
Note:
platen.
Select the number of copies using the copy quantity buttons.
9
Press the start button ( ).
10
The copy will be delivered into the upper output tray.
Close the special feeder when copying is completed.
11
Extended copy jobs
formed grip
65