Table of Contents
Advertisement
[40] 2 images or booklet
If you want your job to be printed 2-sided onto the copy material, four original
pages will be needed to fill both sides of the copy. If your job is 2-sided, you
will also have to identify the required binding edge for the copies (see
'Defining the location and size of the binding edge' on page 56) in order to
select booklet or calendar form for your output.
If you are using 2-sided originals for copying, you should indicate the binding
edge of your originals in order to ensure that the front and back page of the
originals are copied onto the copy material in the correct position.
M
Copying two portrait-oriented / landscape-oriented originals onto one page
side
Indicate whether the originals are 1-sided or 2-sided and choose 1-sided or
1
2-sided copies using the 'Original' and 'Copy' function buttons.
Place your originals in long-edge (portrait-oriented originals) or in short-edge
2
(landscape-oriented originals) feed position in the automatic feeder.
It is not possible to have your output stapled automatically because
Note:
your output will be on 8.5x11" paper
output manually. Placing your originals in short-edge feed position in the
automatic feeder will enable you to staple your copies.
Open the 'Extra' section.
3
Select the 'Original layout' settings.
4
Select whether your originals are read like a book (book binding) or like a
5
calendar (calendar binding).
Select the orientation of the information (portrait or landscape).
6
Select the 'Copy layout' settings.
7
Select the '2 images' option.
8
Enter the number of copies using the copy quantity buttons.
9
Press the start button ( ).
10
Extended copy jobs
. You will have to staple your
67
Advertisement
Table of Contents
