Canon oce 31x5e Daily Maintenance page 39

The orientation of the original in the automatic feeder must correspond with
the feed orientation of the paper in the paper tray (see figure 18). This is the
only way a copy can be made to match the page.
paper sizes shown on
the display panel
11 x 17"
5.5 x 8.5"
8.5 x 11"
8.5 x 11"
[18] Original and paper feed directions
It is impossible to make a 1:1 copy of a 5.5 x 8.5" original with this
Note:
copier model. This means that a copy of a 5.5 x 8.5" original can only be
printed on 8.5 x 11" paper. It is also possible to reduce and print an 8.5 x 11"
original to 5.5 x 8.5" paper.
Originals that do not have a standard DIN A-size (e.g. American paper sizes)
can also be inserted in the automatic feeder. However, their size will not be
recognized by the copier. Copying originals of non-standard sizes may lead to
information loss or to the appearance of gray borders around the edges of the
copy.
Special originals, such as books, magazines and small originals, can be
Note:
copied with the use of the glass platen (see 'Copying special originals' on
page 41). Originals which deviate slightly from the standard original sizes can
also be processed by the automatic feeder.
Copies of a size other than 8.5 x 11" portrait can be stapled manually(see
'Stapling copies' on page 36).
Basic copy jobs
feed direction of
an original for a
1:1 copy
11 x 17"
5.5 x 8.5"
8.5 x 11"
8.5 x 11"
feed direction of an
original for a reduced/
enlarged copy
11 x 17"
5.5 x 8.5"
8.5 x 11"
8.5 x 11"
39