Maintenance - Canon oce 31x5e Daily Maintenance

M
Combine job parts
Define the settings for the entire job.
1
Push the 'Combine' button (the system status must be 'Ready for next part').
2
Put your original on the glass platen or in the ADF.
3
Define the settings for the job part 1).
4
Push the 'Combine' button.
5
Repeat steps 2 - 4 untill all your parts are scanned.
6
Push the green button.
7
If you select a number copies that is larger than 1 and there is not enough
memory space, the quantity of copies will be automatically set to 1.
You can also make a booklet out of combined job parts. For example if you
have different papersizes, single and double sided copies, copies from a book
and you want to make a booklet out of it.
M
Make a booklet out of different job parts
Open the 'Extra' index
1
Select the 'Layout' subindex.
2
Select the 'Booklet' option.
3
Indicate whether the originals are 1-sided or 2-sided using the 'Original'
4
function button.
Define the settings for the entire job.
5
Place the originals on the glass platen or in the ADF.
6
Push the 'Start part' button.
7
Continue steps 4 and 5 until all parts are ready.
8
Press the start button
9
74 Océ 31x5E Copy jobs & daily maintenance
.