Table of Contents
Advertisement
Loading special material
paper or punched paper (or other copy material with a specific page
orientation) take into consideration that the image is rotated 180° during the
copying process. This means that the special material must be loaded into the
paper trays as shown in figure 35 on page 63.
M
Check paper supply
Open the 'Paper' section.
1
Select the 'Paper input' settings (see figure 43).
2
[43] Source card showing paper stock
The 'Stock' graphic shows the stack of paper which is still available in the
paper trays, where figures 1, 2, 3 and 4 represent paper trays 1, 2, 3 and 4. If
the stack of paper is low in the graphic, you will need to refill the paper in the
corresponding paper tray within a short time.
M
Loading paper in tray 4
Open the paper compartment door (see figure 44).
1
[44] Opening the paper compartment door
Maintenance
When loading overhead transparencies, preprinted
1
2
77
Advertisement
Table of Contents
