Table of Contents
Advertisement
Remove the empty staple cartridge by turning it over to the left in a single
5
movement (see action 1 as shown in figure 50).
[51] Removing/replacing the staple cartridge
Remove any remaining staples from the stapler anvil.
6
Insert a new cartridge by sliding it downward to the left until it clicks into place
7
(see action 2 as shown in figure 50 above), ensuring that the first strip of staples
does not slide out of the staple cartridge.
Turn the stapler back.
8
Close the top cover.
9
Slide the frame to the left until it locks into place.
10
Close the paper compartment door.
11
Slide several sheets of paper into the stapling slot, as shown below.
12
[52] Manual stapling
This causes the strip of staples to move a bit towards the mouth of the stapler.
Repeat the manual stapling 4 to 6 times, until a staple is inserted in the set of
13
paper. The stapler is now ready for operation.
82
Océ 31x5E Copy jobs & daily maintenance
2
1
Advertisement
Table of Contents
