Copying Onto Various Types Of Copy Stock - Canon PC880 Operator's Manual

Copying onto Various Types of Copy Stock

To make copies with copy stock which cannot be loaded in the cassette, such as any heavy paper or card stock,
transparencies or labels, use the multi-stack bypass (PC880) or single-sheet bypass (PC860).
For the PC880
1
Place your original on the platen glass. The side that you want to
copy must face downward. Align the original between the
appropriate paper size marks.
CAUTION:
Close the platen glass cover gently to avoid catching your hand, as this
may result in personal injury.
Do not press down hard on the platen glass cover when using the
platen glass to copy thick books. This may damage the platen glass
and/or result in personal injury.
MEMO:
After placing the original, lower the platen glass cover. Do not copy
...............................
with the platen glass cover left open; doing so will result in excessive
toner consumption.
2
Load copy stock face up into the multi-stack bypass.
(See "How to Load Copy Paper in the Multi-stack Bypass," on
p. 25.)
...............................
3
Press the Paper Select key to select the multi-stack bypass.
MEMO:
The indicator on the control panel will light.
...............................
BASIC COPYING
Paper size marks
Load paper up to here
29