Other Operation And Setting; Activate Backlight; Lock / Unlock Keypad; Set Alarm On / Off - Oregon Scientific SE833 User Manual

first, as indicated by flashing
stops flashing. The watch will also prompt you to
run 1 mile.
4. Press SET to start running. Ensure to complete running
1 mile for accurate fitness measurement. While running,
the watch will display the exercise time, distance and
heart rate.
5. After completing the run, your watch will automatically
calculate and show your fitness index. The higher the
index, the fitter you are. The diagrams below provide a
general guide as to what your fitness index means.
FITNESS INDEX FOR MEN
60
50
40
30
20
22 27
Fitness Index
FITNESS INDEX FOR WOMEN
60
50
40
30
20
15 20 25
Fitness Index
SE833 EN 11.indd 20
and . Wait until
32 37 42
30 35 40

OTHER OPERATION AND SETTING

ACTIVATE BACKLIGHT

Press / to turn backlight On for 5 seconds.
NOTE
The backlight function will not operate if "
is displayed.

LOCK / UNLOCK KEYPAD

Press and hold /
keypad. indicates keypad is locked.

SET ALARM ON / OFF

1. In Time Mode, press SET.
2. Press ST/LAP/+ to turn alarm On or Off.
the alarm is turned On.
3. Press MODE or SET to exit.

SILENCE ALARM

• Press any button to stop the alarm and it will activate
again 24 hours later.
OR
• Set the alarm to Off.

SET BEEP TONE ON / OFF

In Time Mode, press ST/LAP/+.
is turned Off.
20
" or "
for 2 seconds to lock or unlock
indicates
indicates the beep tone
6/1/09 10:08:25 AM
"