Device Search Before Exercise; Auto Toggle Data View During Exercise; Pause And Resume Exercise - Oregon Scientific SE833 User Manual

DEVICE SEARCH BEFORE EXERCISE

Before you start exercise, allow the watch a few seconds
to search for device first. This is to ensure you can receive
comprehensive calculations (such as your lap, calorie, heart
rate, distance, step, speed and cadence) during exercise.
But if you start exercise without device search, you will only
receive heart rate readings.
When you are in the screen below, you will find that the
device icons ( , , or
no heart rate values. Wait until
and heart rate values appear. Then you can start exercise
by pressing SET.

AUTO TOGGLE DATA VIEW DURING EXERCISE

During exercise, if you want the watch to automatically toggle
the exercise data, go to Setting Mode to do the setting.
1. Press MODE repeatedly to select
2. Press ST/LAP/+ repeatedly to select "SET WATCH".
3. Press SET.
SE833 EN 11.indd 14
) are flashing and there are
or stops flashing
.
4. Press ST/LAP/+ or -/SP repeatedly to select "SET
VIEW".
5. Press SET.
6. Press ST/LAP/+ to select "TOGGLE ON".
7. Press SET to confirm selection.
NOTE
If you have not set the above setting, you can
still view your exercise data by manually pressing SET
repeatedly during exercise.

PAUSE AND RESUME EXERCISE

If you need to take a break during exercise, press -/SP. Do
not press MODE, otherwise your exercise data will be lost.
During the long pause, the watch will lost connection with
the device. Hence, once you resume exercise, allow the
watch a few seconds to search for device first by pressing
SET. You will find that the device icons (
flashing and there are no heart rate values. Wait until
stops flashing and heart rate values appear. Then you
can resume exercise by pressing ST/LAP/+.
14
, , or ) are
or
6/1/09 10:07:34 AM