Oregon Scientific SE833 User Manual page 25

To synchronise watch with software:
On the PC
1. Plug in the USB dongle.
2. Start up the software by double-clicking
3. Click on the software.
On the watch
4. Press MODE repeatedly to select
5. The screen
to start synchronising.
On the PC
6. The message box below will be displayed.
U PLOAD
SE833 EN 11.indd 25
.
.
will be displayed. Press SET
DOWNLOA D
• To upload data from the software to the SE833 watch,
click .
• To download data from the SE833 watch to the software,
click .
• To exit, press Esc.
NOTE
Synchronisation cannot be cancelled while in
progress.
On the watch
7. If synchronisation is successful, the screen will display
. If synchronisation fails, the screen will
display
try again or press MODE to exit.
NOTE
For more details of the software interface and
functions, refer to the PC Application Software User
Guide inside the CD-ROM.
25
. Press ST/LAP/+ then SET to
6/1/09 10:08:47 AM