Clear Records; Other Operations And Settings; Activate Alarm; Activate Backlight - Oregon Scientific SH201 Manual

Effectiveness of training:
Amount of time when heart rate
exceeded the target zone
Effectiveness of training:
Amount of time when heart rate
fell below the target zone

CLEAR RECORDS

This watch can contain data for up to 99 laps. Individual
memory cannot be selected and deleted. The watch only
allows for all data to be deleted.
To delete memory:
Press MODE/- repeatedly to select
SP/+ until "CLEAR MEM" is displayed. Press and hold SET/
LAP to delete all records.
SET/LAP
When memory is full, "MEM FULL" will be displayed,
followed by "CLEAR MEM".
•
OR
•

OTHER OPERATIONS AND SETTINGS

ACTIVATE ALARM

To set daily alarm, refer to "Set watch profile" above.
To activate / deactivate alarm:
1.
2.
3.

ACTIVATE BACKLIGHT

, then press ST/
Press
another 3 seconds).
NOTE
is displayed.

BEEP TONE ON / OFF

Press ST/SP/+ to activate / deactivate beep tone.
15
Press and hold SET/LAP to delete all records.
Press SET/LAP to ignore and start an exercise without
recording data for it.
Press SET/LAP. Display will show "ALARM ON/OFF".
Press ST/SP/+ to toggle ON/OFF.
Press SET/LAP to confirm selection.
/ . (Press any key to extend backlight for
The backlight function will not operate if "
indicates beep tone is deactivated.
"