Clock Display Mode; Nd Time Zone; Keypad Tone; Alarm Mode - Oregon Scientific SmartHeart SE120 User Manual

1. Press MODE to switch to Clock
Mode.
2. Press and hold SET until the first
setting flashes.
3. Press ST / SP / + or MEM / - to change the setting.
Hold to speed through the options. Press SET to
confirm the setting and move on to the next one.
4. Repeat step 3 to change other settings for this
mode.
5. The setting sequence is 12 / 24 hour clock format,
hour, minute, second, date format, year, month and
date.
6. Press MODE to exit the setting mode at any time.
NOTE The clock is programmed with a 50-year
auto-calendar, which means you do not need to reset
the days of the week and dates each month.

CLOCK DISPLAY MODE

You can change the 2
when you are in the Clock Display Mode.
2 nd TIME ZONE
To toggle between time zone 1 and 2, press ST / SP /
+. Press and hold to change the time zone to T1 or T2
permanently.
SE120_M_EN_R7
nd time zone and keypad tone
8
When you set the hour, minute, second, year, month
and date in the Clock Setting Mode, you will be setting
the permanently selected T1 or T2 time.

KEYPAD TONE

To toggle between keypad tone ON and OFF, press
MEM / -. appears when the keypad tone is OFF.

ALARM MODE

SETTING THE ALARM

To set the alarm:
1. Press MODE to switch to Alarm
Mode.
2. Press and hold SET until the first
setting flashes.
3. Press ST / SP / + or MEM / - to change the setting.
Hold to speed through the options. Press SET to
confirm the setting and move on to the next one.
4. Repeat step 3 to change other settings for this
mode.
5. The setting sequence is hour and minute.

ACTIVATING / DEACTIVATING THE ALARM

1. Press MODE to navigate to Alarm Mode.
2. Press ST / SP / + to activate or deactivate the alarm.
appears when the alarm is activated.
8
2006.4.12, 10:53 AM