Warnings - Oregon Scientific SmartHeart SE120 User Manual

POWER
Watch 1 x CR2032 3V lithium battery
Chest belt 1 x CR2032 3V lithium battery
OPERATING ENVIRONMENT
Operation
5°C to 40°C (41°F to 104°F)
temperature
Storage -20°C to 70°C (-4°F to 158°F)
temperature

WARNINGS

To ensure you use your product correctly and safely,
read these warnings and the entire user manual before
using the product. The warnings given here provide
important safety information and should be observed
at all times.
• The product is a precision instrument. Never attempt
to take this device apart. Contact the retailer or our
customer service department if the product requires
servicing.
• Do not touch the exposed electronic circuitry, as there
is a danger of electric shock.
• Take precautions when handling all battery types.
• Remove the batteries before storing the product for a
long period of time.
• Do not use the chest belt in aircrafts or hospitals.
The use of radio frequency products can cause
malfunctions in the control devices of other
equipment.
SE120_M_EN_R7 18
• Do not bend or stretch the transmitter part of the
chest belt.
• Check all major functions if the device has not been
used for a long time. Maintain regular internal testing
and cleaning of your device.
• Do not dispose this product as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.
• Clean the watch and chest belt thoroughly after each
training session. Never store the products when wet.
• Use a soft, slightly moistened cloth to clean the
product. Do not use abrasive or corrosive cleaning
agents, as these may scratch the plastic parts and
corrode the electronic circuit.
• Avoid pressing the keys with wet fingers, under water,
or in heavy rain, as this may allow water to gain entry
into the electrical circuitry.
• Do not subject the product to excessive force, shock,
dust, temperature changes, or humidity. Never
expose the product to direct sunlight for extended
periods. Such treatment may result in malfunction,
a shorter electronic life span, damaged batteries, or
distorted parts.
• Do not tamper with the internal components. Doing
so will terminate the product warranty and may cause
damage. The main unit contains no user-serviceable
parts.
• Do not scratch hard objects against the LCD display
as this may cause damage.
18
2006.4.12, 10:53 AM